[AV求教] 7.1 最低空間要求

[orpheuslau]

求教7.1 最低空間要求....

曾有大大教 7.1最少要幾多幾多平方呎...

但亦有人話空間小反而易控制....

想請教大家的標準係.....

[kingleecm]

我只知皇帝位後面唔係貼住牆就 ok

[Raymond Wan]

求教7.1 最低空間要求....

曾有大大教 7.1最少要幾多幾多平方呎...

但亦有人話空間小反而易控制....

想請教大家的標準係.....

其實大小沒有一定準則

用 7.1 最好皇帝位離後面牆有數呎距離，後環迴喇叭才可合理地放置

而且才能令側環迴喇叭與後環迴喇叭的聲效更連接，包圍及定位更實在和準確



如果地方太細及皇帝位貼住後牆，用 5.1 較合理，效果亦佳



專業系統一般有分大小，但用空間容積分的

1,000 立方呎 --> 5.1
1,500 立方呎 --> 5.1
2,000 立方呎 --> 5.1 / 7.1
2,500 立方呎 --> 7.1
>2,500 立方呎 --> 7.1

[Psychoav]

單人戰機

[Raymond Wan]

單人戰機

如視聽空間是接近方型 --> 5.1

如視聽空間是長方型 --> 5.1 或 7.1 均可

[fr888]

單人戰機

[DonDon]

我玩7.1 in small bedroom only

[fr888]

我玩7.1 in small bedroom only

[Raymond Wan]

視聽空間不大，用 7.1, 9.1, 10.2, 22.2 .... ..... 系統，也無大作用



10.2 系統

22.2 系統

[FUJI]

我玩7.1 in small bedroom only

[pin]

求教7.1 最低空間要求....

曾有大大教 7.1最少要幾多幾多平方呎...

但亦有人話空間小反而易控制....

想請教大家的標準係.....

please try this software can help a lot - http://www.comsol.com/products/acoustics/ and can check all room acoustic more than others. Many brand also use it to calculate some acoustic, even the glass speaker of crystal cable

[orpheuslau]

求教7.1 最低空間要求....

曾有大大教 7.1最少要幾多幾多平方呎...

但亦有人話空間小反而易控制....

想請教大家的標準係.....

please try this software can help a lot - http://www.comsol.com/products/acoustics/ and can check all room acoustic more than others. Many brand also use it to calculate some acoustic, even the glass speaker of crystal cable

Haha....pin hing...

in fact i have used this software lar.....
viewtopic.php?f=7&t=135050&hilit=+comsol.#p2673358

but it is so pro ar...and i can't use it quite well >_<

[peterso]

我 100 sq. ft. 都得...要偷偷窗台位裝後中置

[kan72]

求教7.1 最低空間要求....

曾有大大教 7.1最少要幾多幾多平方呎...

但亦有人話空間小反而易控制....

想請教大家的標準係.....

其實大小沒有一定準則

用 7.1 最好皇帝位離後面牆有數呎距離，後環迴喇叭才可合理地放置

而且才能令側環迴喇叭與後環迴喇叭的聲效更連接，包圍及定位更實在和準確



如果地方太細及皇帝位貼住後牆，用 5.1 較合理，效果亦佳



專業系統一般有分大小，但用空間容積分的

1,000 立方呎 --> 5.1
1,500 立方呎 --> 5.1
2,000 立方呎 --> 5.1 / 7.1
2,500 立方呎 --> 7.1
>2,500 立方呎 --> 7.1

[pin]

求教7.1 最低空間要求....

曾有大大教 7.1最少要幾多幾多平方呎...

但亦有人話空間小反而易控制....

想請教大家的標準係.....

please try this software can help a lot - http://www.comsol.com/products/acoustics/ and can check all room acoustic more than others. Many brand also use it to calculate some acoustic, even the glass speaker of crystal cable

Haha....pin hing...

in fact i have used this software lar.....
http://www.av100fun.com/viewtopic.php?f ... .#p2673358

but it is so pro ar...and i can't use it quite well >_<

just take a look for your thread, if you want to check single tone, better use some wandering testing, much better to check the distance from the wall then calculate the toe-in angle