新鮮熱鬧 ~ 有排震玩兒

發表人 **小小Pat** 發表於 2005-01-24, 15:35

買得心頭好

，
期待祥細報告

！

發表人 **拓荒者** 發表於 2005-01-24, 15:53

小小Pat 寫:買得心頭好，
期待祥細報告！

小弟會盡力report .... 因知識有限,唔知可以報到幾多!!!!!!!!!!

:ebsmile:

發表人 **小小Pat** 發表於 2005-01-24, 15:57

拓荒者寫:
小小Pat 寫:買得心頭好，
期待祥細報告！

小弟會盡力report .... 因知識有限,唔知可以報到幾多!!!!!!!!!!

只在乎分享！

發表人 **拓荒者** 發表於 2005-01-24, 15:59

小小Pat 寫:
拓荒者寫:
小小Pat 寫:買得心頭好，
期待祥細報告！

小弟會盡力report .... 因知識有限,唔知可以報到幾多!!!!!!!!!!

只在乎分享！

真係好warm ......... AV100Fun 呢樹!!!!!!!!!!!

:modlaugh:

發表人 **kitchan** 發表於 2005-01-24, 17:03

拓荒者兄:
你是用yamaha rx-v2500,如果用機yapo auto set,個 Crossover 會set到200hz ga!! :hit:

發表人 **拓荒者** 發表於 2005-01-24, 17:31

kitchan 寫:拓荒者兄:
你是用yamaha rx-v2500,如果用機yapo auto set,個 Crossover 會set到200hz ga!!

kitchan兄: 點解會咁既!?個spec.寫話個woofer係40~120Hz,但點解會變200Hz :sorry:

發表人 **kitchan** 發表於 2005-01-24, 22:00

拓荒者寫:
kitchan 寫:拓荒者兄:2
你是用yamaha rx-v2500,如果用機yapo auto set,個 Crossover 會set到200hz ga!!

kitchan兄: 點解會咁既!?個spec.寫話個woofer係40~120Hz,但點解會變200Hz

200HZ是部amp set crossover,即是代表部amp把200HZ以下低頻就會轉到woofer,你的woofer如果係40~120Hz,有機會120~200hz 會流失,所以用完yapo之後,我都會把crossover set 回 80hz,而woofer上的high cut 應校到最盡.
我也是用yamaha rx-v2500,而woofer是用energy s10.2 :hello:

我就是心急人呀!!!! :clap2hands

發表人 **拓荒者** 發表於 2005-01-24, 22:47

Wellcome ..... kitchan :clap2hands

Since my 8" sub-subwoofer is L & R channel only, I used the L channel (Mono) for my 2500 LEF input, after the YAPO ... 2500 can detect 8" sub-woofer in which Hz of opeation, and 2500 can find other responding Hz when adjust the cross-over in sub-woofer. But now in my 10" has both input channel, one is L&R speaker high level input and one is LEF input (present setup is Connect in LEF input), now 2500 can't auto detect the responding and never been shown in 200Hz, nothing to change when set in front of the crossover control in sub-woofer.

:dont_un:

發表人 **kitchan** 發表於 2005-01-24, 23:00

拓荒者寫:Wellcome ..... kitchan

Since my 8" sub-subwoofer is L & R channel only, I used the L channel (Mono) for my 2500 LEF input, after the YAPO ... 2500 can detect 8" sub-woofer in which Hz of opeation, and 2500 can find other responding Hz when adjust the cross-over in sub-woofer. But now in my 10" has both input channel, one is L&R speaker high level input and one is LEF input (present setup is Connect in LEF input), now 2500 can't auto detect the responding and never been shown in 200Hz, nothing of change when set in front of the crossover control in sub-woofer.

咁如果2500冇set到200hz,就唔洗理會啦!!可能每個環境都唔一樣,你只要用 LEF input 就ok la!! :048:

發表人 **拓荒者** 發表於 2005-01-24, 23:04

kitchan 寫:咁如果2500冇set到200hz,就唔洗理會啦!!可能每個環境都唔一樣,你只要用 LEF input 就ok la!!

Yes Sir ..... I think is OK :a010:

! I hope can feel you sub-woofer if possible! :ebsmile:

發表人 **kitchan** 發表於 2005-01-24, 23:13

拓荒者寫:
kitchan 寫:咁如果2500冇set到200hz,就唔洗理會啦!!可能每個環境都唔一樣,你只要用 LEF input 就ok la!!

Yes Sir ..... I think is OK ! I hope can feel you sub-woofer if possible!

界你睇