請問我部DVD機點解睇DVD時只出到2聲道呢？

發表人 **dannywong** 發表於 2008-01-20, 09:58

請問我部DVD機點解睇DVD時只出到2聲道呢？
用緊PIONNER DV-600AV

在選單已選了5.1，但睇碟時唔知點解按audio得2.1

請問要點SET呢？
請指教？

發表人 **luckybeanbean** 發表於 2008-01-20, 10:04

you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

發表人 **cckeric** 發表於 2008-01-20, 10:18

老翻dvd

發表人 **dannywong** 發表於 2008-01-20, 10:39

luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

發表人 **luckybeanbean** 發表於 2008-01-20, 10:47

dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

發表人 **dannywong** 發表於 2008-01-20, 10:51

luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

我用HDMI去部705 AMP。
都有駁埋光纖線入。
真係攪極都唔掂！
請幫忙！

發表人 **luckybeanbean** 發表於 2008-01-20, 11:00

cckeric 寫::question1: 老翻dvd

x2?

發表人米糕發表於 2008-01-20, 11:02

dannywong 寫:
luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

我用HDMI去部705 AMP。
都有駁埋光纖線入。
真係攪極都唔掂！
請幫忙！

Refer to the user manuel, there is a 'Digital Audio setting' sub-menu under 'Initial setting menu', you can change your setting there.

發表人米糕發表於 2008-01-20, 11:06

發表人 **luckybeanbean** 發表於 2008-01-20, 11:07

米糕寫::announce:

發表人 **dannywong** 發表於 2008-01-20, 11:39

cckeric 寫::question1: 老翻dvd

我冇睇老翻好多年啦！ :a011:

發表人 **dannywong** 發表於 2008-01-20, 11:40

luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

試到啦，原來要用同軸或光纖才出到5.1！
hdmi就唔得！ :045:

發表人 **luckybeanbean** 發表於 2008-01-20, 11:53

dannywong 寫:
luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

試到啦，原來要用同軸或光纖才出到5.1！
hdmi就唔得！

發表人米糕發表於 2008-01-20, 12:07

luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

試到啦，原來要用同軸或光纖才出到5.1！
hdmi就唔得！

有冇試o下 hdmi out set 'auto' 呀?

發表人 **kofz** 發表於 2008-01-20, 12:51

米糕寫:
luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:
dannywong 寫:
luckybeanbean 寫:you need to set the dvdplayer to have bitstream output.
use a coaxial cable, or optical cable to connect to avamp

請問係邊到set呢？
因為我部dvd機唔覺有bitstream！
其他都試過晒！

are you using coaxial cable to connect to avamp?

試到啦，原來要用同軸或光纖才出到5.1！
hdmi就唔得！

有冇試o下 hdmi out set 'auto' 呀?

我部696光纖同hdmi都出到5.1 :048:

同軸未試過

誰在線上

請問我部DVD機點解睇DVD時只出到2聲道呢？

請問我部DVD機點解睇DVD時只出到2聲道呢？