[Router 100fun] 華碩 RT-N56U 用後小感 (p.7 fw 小比較)

[andyyau]

快d update啦， openssl 問題都中左：

3.X.3.8-081:
----------------------------------------------------------
- Fixed WAN DHCP6C client IA-ID (now generated from WAN MAC).
- Fixed SSH brute-force protection mode "Max 3 tries/60 min".
- Fixed infinite loop in xUPnPd plugin "xupnpd_ivi".
- Added support Stateful mode for LAN DHCPv6 server.
- Added support 802.1x EAP-TTLS and EAP-PEAP WAN authentication.
- Added support static WAN DNS#3.
- Added support store system time to Internal Storage (/etc/storage).
- Added support custom exports file /etc/storage/exports for NFS server.
- Added NTP client callback, improve relability.
- Added WiFi Guest AP control to WPS button behaviour.
- Updated OpenSSL to v1.0.1g (vulnerability CVE-2014-0160).
- Updated OpenVPN to 2.3.3.
- Updated miniupnpd to 1.8.20140401.
- Updated usb-modeswitch to 2.1.1, updated usb-modeswitch-data up to 2014-03-27.
- Updated miniDLNA from upstream.
- Updated xUPnPd to rev398.
- Updated Entware new URLs.
- Updated Linux kernel code from upstream.
- Updated uClibc inet code from upstream.
- Improved WebUI render under IE11.
- Improved WebUI response.

[RCHK]

3.X.3.8-085 update,

代碼: 選擇全部

- Migrate to kernel-3.4.x tree.
- Updated kernel-3.4.x to 3.4.104.
- Updated Ralink kernel arch code from to SDK 4.2.1.0.
- Updated NCM, MBIM and usbnet code up to kernel 3.17.
- Updated L2TP kernel driver code, optimisations.
- Updated OpenSSL to v1.0.1j, disable SSLv3 code.
- Updated OpenVPN to 2.3.4.
- Updated pppd to 2.4.7.
- Updated radvd to 1.15.
- Updated dnsmasq to v2.72+.
- Updated miniupnpd to 1.8.20141022.
- Updated dropbear SSH to 2013.65.
- Updated INADYN to v1.99.12, added support SSL mode and new DDNS services.
- Updated usb-modeswitch to 2.2.0, updated usb-modeswitch-data up to 2014-05-29.
- Updated transmission to 2.84+.
- Updated miniDLNA to 1.1.4.
- Updated xUPnPd to rev399.
- Updated exFAT code to 1.2.9.
- Updated timezones for Russia.
- Added 'Detect Internet' feature.
- Added 64 bit stats for ppp and usbnet interfaces.
- Added PHY link force modes w/o autonegotiation to ethernet switch control.
- Added force IGMP version control.
- Added NAT mode to VPN server.
- Added pure routed mode w/o NAT to static VPN client.
- Added user up/down script to OpenVPN client.
- Added route all traffic through static VPN client.
- Added access restriction control for VPN server clients.
- Added DHCP server in AP mode (for static LAN IP only).
- Added domain field in AP mode.
- Added WebUI intranet status page in AP mode.
- Added WebUI session traffic for Modem/PPTP/L2TP, show DHCP lease expires time.
- Added port control for remote syslog server.
- Added root share mode for SMB server.
- Added support WINS server feature.
- Added control LLTD and ASUS discovery services from WebUI.
- Added hub-ctrl utility for control USB ports power/clock.
- Added busybox applets microcom, adduser, addgroup.
- Improved HW_NAT offload for WiFi interfaces.
- Improved networkmap LAN scanner.
- Improved contol for QMI-based USB modems.
- Improved iptables firewall rules.
- Improved WPS/Reset buttons sensitivity, expand front LED's tweak modes.
- Increased up to 64 clients for APSoC WiFi driver.
- Fixed forwarding a few LAN packets w/o NAT to WAN during router startup.
- Fixed missing TCPMSS target for VPN client and server on WAN IPoE connection.
- Fixed broken DNS servers after manual stop OpenVPN client.
- Fixed broken apostrophe and slash chars for pppd username/password.
- Fixed broken OpenSSH DH moduli.
- Fixed background syslog fetching from WebUI float panel.